Service area · Sumner County

Millersville landscaping on 38 percent slopes

More than half the ground around Millersville’s center is Sulphura soil on highly dissected uplands, at a median slope of 38 percent.

TL;DR

Millersville has 5,836 people and a median home built in 1993, with 34 percent of its homes dating from before 1980. The defining fact is slope: Sulphura soil covers 56 percent of the area around its center at a median grade of 38 percent, and Dellrose, Hawthorne and Mimosa all sit above 30 percent. Those soils mostly drain fast rather than slow, so the work here is walls, terraces and steps for flat space, and planting chosen for dry, rocky ground.

Can I have a level patio or lawn on a Millersville hillside?

Yes, by building it: a level area on ground this steep is carved out with retaining walls. Around Millersville’s center, Sulphura soil covers about 56 percent of the ground at a median slope of 38 percent, and Hawthorne, at 6 percent, has the same 38 percent median. On a grade like that, every foot of flat space has a wall below it, above it, or both.

Terracing in steps keeps each wall manageable and leaves planting room between tiers. On a slope this sharp, a wall’s design also has to account for what sits above it, such as a driveway or more hillside, and taller walls generally need engineering. The walls, steps and patios are built under hardscape construction, after the planning and permitting questions are settled in project planning and consulting.

Why do plants dry out so fast on Millersville slopes?

Because the soils drain quickly and the water runs off before it soaks in. Sulphura and Hawthorne are both described as somewhat excessively drained, and Dellrose, about 13 percent of the ground, is cherty colluvium with moderately rapid permeability. That is the reverse of the heavy-clay problem common elsewhere in Middle Tennessee: here the risk is drought stress in August, not wet feet in April.

The planting plan responds with plants that tolerate dry, gravelly ground, a generous mulch layer to hold moisture, and beds set on the terraces where water has time to soak in rather than on the open slope. New plantings need regular watering through their first summer. Plant selection and placement are part of landscape design and installation.

Where does the rainwater go on a steep Millersville lot?

Downhill, fast, and toward whatever sits at the bottom. On slopes above 30 percent, even soils that drain well cannot absorb a heavy storm before it starts moving, and Mimosa clay, about 5 percent of the ground here, is slowly permeable with medium to rapid runoff. The result is water hitting the uphill side of a house, a patio or a wall.

Catching it above the structure is the usual answer: a swale or a trench drain across the slope, a drain line behind every retaining wall, and downspouts carried well past the foundation. Stone-lined channels keep the runoff from cutting new gullies on the way down. Those are the pieces of drainage solutions, and on a Millersville hillside they go in with the walls.

04Answers

Millersville questions

Do I need an engineer for a retaining wall in Millersville?

For a tall wall, generally yes. Walls more than about four feet high are usually engineered, and on Millersville’s steep ground a wall carrying a slope or a driveway above it can need one at a lower height. Wilhelm’s project planning covers permitting guidance, so the question is settled before the design is finished.

What plants survive on dry Millersville slopes?

Plants suited to fast-draining, gravelly ground do best, along with a deep mulch layer and watering through the first summer. Sulphura and Hawthorne soils, which cover most of the ground around Millersville’s center, are somewhat excessively drained, so species that need constantly moist soil struggle on the open slope and belong on lower terraces.

How long does a terraced wall project take in Millersville?

Most hardscape projects, walls included, are finished in one to three weeks once the crew begins. A steep Millersville lot may sit toward the longer end, because each tier has to be excavated, based and drained in order, and getting machines and stone onto a hillside takes planning. The schedule is set at the consultation.

Is Millersville too far north for Wilhelm?

No. Millersville is about 28 miles from Brentwood, inside the area the company covers. Because hillside jobs here depend so much on the site, the first step is the free on-site consultation, where the slope, the soil and access for equipment are looked at before a written estimate is prepared.

Free estimates

Start with a walk around the yard

Tell Hunter what you have in mind. The consultation and the written estimate are free.

Call Free estimate