Service area · Davidson County

Whites Creek ground runs steep and stony

More than half the ground mapped around Whites Creek lies on slopes with medians of 16 to 35 percent, much of it gravelly or cherty.

TL;DR

Whites Creek is a Metro Nashville community about 20 miles from Wilhelm’s Brentwood base, with 3,442 residents in the 37189 ZIP area. Its ground is steep and stony: Bodine at a median slope of 35 percent, Mimosa at 19 and Dellrose at 16 make up 55 percent of what is mapped around its center, with gravelly Ocana along the flood plains. Making a level pad, a lawn or a patio there starts with grading and erosion control, and clearing trees needs a Metro permit.

How do you make a level spot on a steep Whites Creek lot?

By cutting into the slope, using the soil to fill the low side and holding the edges with walls or a stabilized bank. With Bodine at a median slope of 35 percent and Mimosa at 19 percent around Whites Creek, almost any flat area for a lawn, a patio or a parking pad has to be built rather than found. That is the core of Grading & Site Prep.

Depth of fill is the number to watch. Metro Water Services lets grading go without a permit only while fill stays under 5 feet deep, the soil moved stays at 100 cubic yards or less and the area at 10,000 square feet or less. On a hillside the fill side can deepen fast. Finish grading for retaining walls is exempt, and the walls come from Hardscape Construction.

What keeps a cleared slope in Whites Creek from washing out?

Covering bare soil quickly and slowing water before it gathers speed. Mimosa, 18 percent of the ground mapped around Whites Creek, is a slowly permeable clay with medium to rapid runoff, so rain on a cleared Mimosa slope runs off almost at once. Dellrose, on cherty foot slopes and steep hillsides, takes water in faster but sits right where that runoff lands.

Before any clearing, Metro’s guidance says tree cutting requires a tree removal permit. After it, the slope is shaped, mulched or sodded, and planted with deep-rooted shrubs and groundcovers through Landscape Design & Installation. Where water still concentrates, a rock-lined channel or a buried line through Drainage Solutions carries it down without cutting a gully.

Is the gravelly flat ground in Whites Creek good for a lawn or patio?

For a patio, usually yes; for a lawn, it needs help holding water. Ocana, 11 percent of the ground mapped around Whites Creek, is a deep to very deep gravelly soil formed in alluvium on flood plains, with moderately rapid permeability and a median slope of 2 percent. Water drains through it quickly, which suits a patio base and leaves a lawn dry in midsummer.

Turf on Ocana does better with organic matter worked into the top few inches, a mowing height left on the tall side and watering timed to the dry spells, all part of Lawn & Yard Care. Because these soils lie along flood plains, nothing is built across the path floodwater would take.

04Answers

Whites Creek questions

Can you clear brush and trees on a Whites Creek property?

Yes. Land clearing and debris removal are part of Grading & Site Prep, and storm debris cleanup is too. Under Metro Water Services’ guidance, cutting trees requires a tree removal permit, so that is settled before any saw is started on a Whites Creek lot.

Do I need a grading permit to build a house pad in Whites Creek?

Possibly. Metro Water Services lets work go without a grading permit only while it stays within all three of its limits: 100 cubic yards, 10,000 square feet and fill under 5 feet deep. A pad cut into a steep Whites Creek slope can pass one of those quickly, so it is checked before work starts.

Why are there so many rocks in my Whites Creek soil?

Because much of the ground there is gravelly or cherty. Bodine is a gravelly soil weathered from cherty limestone, Dellrose is cherty colluvium on foot slopes, and Ocana is gravelly alluvium on the flood plains. Together they cover close to half of the ground mapped around Whites Creek, so stone in a dig is normal.

How long does site prep take on a sloped Whites Creek lot?

A few days to a week on most residential projects, the company’s usual range for site preparation. A steep Whites Creek lot can run toward the longer end, since clearing, cutting and stabilizing a slope take more passes than leveling flat ground, and wet weather stretches it further.

Free estimates

Start with a walk around the yard

Tell Hunter what you have in mind. The consultation and the written estimate are free.

Call Free estimate